Introducing Gluey UltraGrip – an advanced thin-set tile adhesive that redefines the standards of tile installation. Designed to elevate your tiling projects, Gluey UltraGrip is a cement-based adhesive suitable for fixing a variety of tiles, including ceramic, porcelain, terracotta, and granite, on mortar screed or concrete bases.
Unlike conventional tile adhesives, Gluey UltraGrip offers a unique blend of versatility and performance. Whether you’re working on walls or floors, this adhesive is your go-to solution. Its highly workable mix, combined with exceptional water retention capability, makes the process of fixing tiles on floors and walls both effortless and cost-effective. The result is a superior bond strength that ensures the longevity and stability of your tiled surfaces
RECOMMENDED USAGE
APPLICATION METHOD
MIXING
Pour 6 litres of clean water into bucket.
Allow the mixture to soak for 2 mins.
Empty entire 20kg bag of gradually in to the same bucket while mixing using a stirrer (rpm<500).
Mix again for 2 mins. if required, add in small amounts up to 1/2 litre of water whilst mixing till you get a smooth, spreadable paste
Mix thoroughly for 3 mins into a smooth, workable paste.
APPLICATION
Apply a 3-5mm layer of High Performance on a clean & dry surface with a notched trowel in a single direction.
Use a rubber mallet to fix tiles in place.
Leave a 3mm gap between the tile and press firmly into wet adhesive.Clean the gaps.
Grout 9hrs after tiling.
Leave a 3mm gap between the tile and press firmly into wet adhesive. Clean the gaps.
OTHER NOTES
Use within 2hrs of mixing.
Max recommended tile size 6ft x 3ft & less.
Not necessary to wet Tiles. Clean the bonding surface with a wet sponge before tiling.
Walk on surface 24hrs after tiling.