Introducing Gluey UltraGrip – an advanced thin-set tile adhesive that redefines the standards of tile installation. Designed to elevate your tiling projects, Gluey UltraGrip is a cement-based adhesive suitable for fixing a variety of tiles, including ceramic, porcelain, terracotta, and granite, on mortar screed or concrete bases.
Unlike conventional tile adhesives, Gluey UltraGrip offers a unique blend of versatility and performance. Whether you’re working on walls or floors, this adhesive is your go-to solution. Its highly workable mix, combined with exceptional water retention capability, makes the process of fixing tiles on floors and walls both effortless and cost-effective. The result is a superior bond strength that ensures the longevity and stability of your tiled surfaces
RECOMMENDED USAGE
APPLICATION METHOD
MIXING
Shake component B (liquid) well before mixing.
Continue mixing using low speed mechanical mixer (300-400 rpm) for 3 – 5 minutes to a homogeneous slurry.
Pour component B (1kg liquid) completely into a mixing bucket.
Slowly add the component A (2kg powder) into the bucket while mixing.
APPLICATION
Clean and remove all loose materials, oil, grease and other impurities. Thoroughly wire brush the surface and remove the dust by vacuum cleaner.
Apply the first coat (approx. 0.8mm – 1mm) in a vertical direction to cover the whole area.
Protect the applied area from direct sunlight and wind to prevent the plastic shrinkage due to loss of moisture
The area to be waterproofed should be washed with clean water and prior to applying, remove all standing water.
Let the first coat dry for 4 – 6 hours.
Air curing is sufficient.
Masonry float or brush can be used for the applying of 2K-waterproofing coating.
Apply the second coat (approx. 0.8mm – 1mm) in a horizontal direction.
Tiles can be fixed on 2K waterproofing applied surface after 7 days.
OTHER NOTES
Do not add the cement or other cementitious material
Apply a protective screed/mortar layer on the waterproofed area for protection.
Do not add additional water to slurry.
Do not add plasticizers, retarders, accelerates and other additives.